-
Vendor:CNC Fabrication
98.5-03 7.3L CNC Fab HPOP Line Kit w/ HPx - 424004
Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings. Kit comes with passenger,...- $224.95
- $224.95
- Unit price
- per
-
Vendor:CNC Fabrication
96-03 7.3L CNC Fab Stage 1 HPOP - 424017
Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 1 High Pressure Oil Pump from CNC Fabrication, LLC. Typically these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...- From $579.95
- From $579.95
- Unit price
- per
-
Vendor:CNC Fabrication
98.5-03 CNC Fab 7.3L HPOP Line Kit - 424003
Replace your 98.5-03 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These passenger and driver side lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings....- $169.95
- $169.95
- Unit price
- per
-
Vendor:CNC Fabrication
03-04 6.0L CNC Fab Stage 1 HPOP - 424019
Upgrade your 03-04 6.0L Ford Powerstroke with this Stage 1 High Pressure Oil Pump from CNC Fabrication, LLC. MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L Outfitted with a new upgraded housing that cures the infamous "back plate wear-out" with the original design. Typically, these pumps will support...- From $699.95
- From $699.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-97 7.3L CNC Fab HPOP Line Kit w/ Crossover - 424002
Replace your 94.5-97 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with the #1 selling CNC Fabrication™ upgraded HPOP lines! These lines are to replace the typical high mileage expensive leaky OEM HPOP lines. Advanced HPOP lines with DuPont Teflon™ lining. Burst pressure...- $224.95
- $224.95
- Unit price
- per
-
Vendor:CNC Fabrication
96-03 7.3L CNC Fab Stage 2 HPOP - 424018
Upgrade your 96-03 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...- From $749.95
- From $749.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-95 7.3L CNC Fab Stage 1 HPOP - 424015
Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically, these pumps will produce 5.1-5.6gpm which is usually enough volume to sustain 230/100 hybrid injectors. We do not list this pump as an aftermarket high...- From $579.95
- From $579.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab HPOP (HPx) Crossover Line - 424005
This line is for the early '99 through '03, but will work on the 94.5-97 trucks, but you will need to purchase the CNC Fabrication™ OBS hpop lines due to how the lines are routed on the OBS trucks. Fittings are the same style...- $74.95
- $74.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-97 7.3L CNC Fab OBS HPOP Line Kit - 424001
Replace your driver and passenger side 94.5-97 OBS 7.3L Powerstroke high-mileage OEM High Pressure Oil Pump lines with a CNC Fabrication™ upgrade! Advanced HPOP lines with DuPont Teflon™ lining New Genuine Brennan™ Hydraulic fittings Burst pressure rating of 16,000psi and working temperature rating of...- $169.95
- $169.95
- Unit price
- per
-
Vendor:CNC Fabrication
03-04 6.0L CNC Fab Stage 2 HPOP - 424020
Upgrade your 03-04 6.0L Powerstroke with this Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC MODEL/YEAR(S): 2003-2004 ENGINE SIZE: 6.0L This is our mild performance pump and will outperform our Stage 1 pump by around 30% flow volume. Outfitted with a new...- From $949.95
- From $949.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab HPOP Line O-Ring Kit - 424013
94.5-03 7.3L Powerstroke HPOP line o-ring replacement kit. Shipping: Ships USPS First Class when Free Shipping is selected. If UPS is required please select UPS from drop down menu. Here's the solution you were looking for to re-seal your CNC Fabrication 7.3L HPOP line fittings....- From $12.95
- From $12.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab Driver HPOP Line With Fittings- 424009
This line is a replacement driver side line for the 94.5 through '03. Fittings are the same style as those used on the 94.5-97 powerstroke engines. All new Genuine Brennan™ fittings DuPont Teflon™ lining just like OEM Burst pressure rating of 16,000psi Working temperature...- $89.95
- $89.95
- Unit price
- per
-
Vendor:CNC Fabrication
98.5-03 7.3L Replacement Fitting Pack for CNC Fab HPO 2 Line Kit - 424024
98.5-03 7.3L Replacement Fitting Pack for CNC Fabrication HPO 2 Line Kit - 424024 All new Brennan™ Hydraulic fittings High quality Viton™ o-rings DOWNLOADABLE INSTALL INSTRUCTIONS INSTALLATION: Disconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay...- $34.95
- $34.95
- Unit price
- per
-
-
Vendor:Alliant Power
04-10 6.0L Alliant Power High Pressure Oil Pump (HPOP) - AP63661
04.5-10 6.0L Ford Powerstroke High Pressure Oil Pump. Includes seal kit. Refresh your 04.5-10 6.0L Ford Powerstroke with a remanufactured high pressure oil pump from Alliant Power. These pumps are thoroughly cleaned, inspected, and tested to be sure you do not receive a dead...- From $690.31
- From $690.31
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-95 7.3L CNC Fab Stage 2 HPOP - 424016
Upgrade your 94.5-95 7.3L Powerstroke with this rebuilt Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC. Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can...- From $749.95
- From $749.95
- Unit price
- per
-
Vendor:CNC Fabrication
94.5-03 7.3L CNC Fab Driver HPOP Line No Fittings- 424006
This line is a replacement driver side line for the 94.5 through 03. Fittings are the same style as those used on the 94.5-97 powerstroke engines. All new Genuine Brennan™ fittings DuPont Teflon™ lining just like OEM Burst pressure rating of 16,000psi Working temperature...- $79.95
- $79.95
- Unit price
- per
-
Vendor:CNC Fabrication
98.5-03 7.3L CNC Fab SD Passenger HPOP Line No Fittings - 424008
This line is a replacement passenger side line for the Early '99 through '03. Fittings are the same style as those used on the 94.5-97 powerstroke engines. This line can be used on 94.5-97 trucks that have e-fuel for a cleaner install. All new...- $79.95
- $79.95
- Unit price
- per
-
Vendor:CNC Fabrication
94-97 7.3L CNC Fab OBS Passenger HPOP Line No Fittings - 424007
This line is a replacement passenger side line for the '94.5 through '97. If you have e-fuel you can also use the SD passenger line for a cleaner install. Features: All new Genuine Brennan™ fittings DuPont Teflon™ lining just like OEM Burst pressure rating of...- $79.95
- $79.95
- Unit price
- per
-
Vendor:CNC Fabrication
96-03 7.3L CNC Fab HPOP System Re-seal Kit - 424014
Here's the solution you were looking for to re-seal your 7.3L HPOP and line fittings. This will re-seal all 6 fittings on our 3 line HPOP Line kits along with the rear construction port and passenger side construction port on the pump. This kit...- From $32.95
- From $32.95
- Unit price
- per
newsletter sign up
Receive our latest updates about our products and promotions.