Precision Cleaning & Oil Service Kit: Properly Clean & Accurately Re-Oil Your Filter for Maximum Performance & Protection! Enough to service most filters 3 times.
Watch our video as Katie shows you just how easy it is to maintain your air filter step by step.
STEP 1
REMOVE AND CLEAN
Clean sealing area of filter and filter housing with a clean soft rag.
Tap the filter on a hard surface to remove and loosen large paricles and debris. (A soft brush may be used to loosen large particles of debris or bugs.)
Use S&B’s Filter Cleaner to clean the filter.
Gently rinse out the cleaner using low pressure water.
Let filter dry for at least 24 hours.
STEP 2
FILL AND APPLY
Fill applicator with exact amount of oil required for your filter.
Starting 1/2 way from base make 2-3 passes around the circumfrence of the filter in the same area.
Repeat this process evenly spacing out the passes.
STEP 3
INSPECT AND INSTALL
Allow oil to bleed for 20-30 minutes.
Inspect the filter for any white areas the oil did not cover.
With the remaining oil in the applicator apply a small amount of oil to those white areas.
Write the First Review!